Specifications
Model MJ-E22VX-A1
Power supply Single phase 230-240 V, 50 Hz
Dehumidifying capacity 22 L/day
Power consumption 365 W
Water tank capacity Stops automatically at approx. 4.5 L
Weight 13.7 kg
Dimensions (h × w × d) 589 mm × 384 mm × 217 mm

Precautions
WARNING: Mishandling may result in fatal or serious injuries.
CAUTION: Mishandling may result in injuries or damage to your home or property, etc.
WARNING:
Do not start/stop the unit by plugging/unplugging the power cord. This may result in fire and/or electric shock.
Do not use extension cords or multiple head adapters. This may result in fire, electric shock or malfunctions.
Do not damage or modify the power cord or plug. Do not modify, bundle, twist, bend or heat the power cord. Do not place under objects or use with the end close to the plug bent. The cord may be damaged resulting in fire or electric shock. (Keep pets from biting the cord.)
Do not put your fingers or any long object, into the air intake/outlet. Do not touch the swing louvre. The internal fan rotates at high speeds, and such actions may result in injury or malfunctions.
Do not leave the unit unattended for an extended period of time.
Do not stand on, sit on or lean against the unit. The unit may tip over causing injury.
Do not point air-flow from the unit directly at the body. If air-flow is directed at the body for long or short periods, it may harm one’s physical condition.
Before moving the unit always switch it off, unplug it and remove water from the water tank. Moving the unit with water in its tank may cause the water to leak and damage the surrounding objects and in turn result in electric shock and/or an electric leak.
After emptying the tank, transport the unit by grasping the handle firmly. Losing your footing while carrying the unit may cause personal injury or damage to the floor.
Use the unit with caution in rooms that are non-sealed, or where the walls, floor or ceiling are vulnerable to damage or exposure, as the device is safest when used in isolation from other air spaces.
Switch the unit off and unplug from the power source when cleaning it. When the unit is on, the internal fan rotates at high speeds and may cause injury.
Children should be supervised to ensure that they do not engage with the appliance.

What is a washable photocatalytic filter?
The washable photocatalytic filter has a three-layer construction consisting of a white particle filter, a green interior-filter and a blue air-freshener filter.
<Particle filter> - The fine particle filter removes pollen* and dust particles.
<Interior filter> - The interior filter prevents any unwanted particles from exiting the unit.
<Air-freshener filter> - The special air-freshening agent contained in the fibres of the air-freshener filter absorbs odorants such as ammonia. The odor is broken down by photocatalysis renewing the air-freshening properties.
As the filter’s particle and air-freshening properties are renewed by simply soaking and leaving it to dry in the sun, the air purifier can be used continuously over a long time. Cigarette smoke and toxins found in smoke, such as carbon monoxide, cannot be removed with this filter.
* Diameter of pollen: approx. 10–100 μm

How does the dehumidifier work?
If you pour cold water into a cup, the air around it becomes cold, causing water droplets to form on the surface of the cup. The dehumidifier takes advantage of this phenomenon to remove moisture from the air.
1. The unit draws air from the room, cools it with its cooling coil, causing the moisture to transform into water droplets.
2. The water droplets fall into the water tank.
3. The dehumidified air is reheated by the heating coil, and then discharged.
The humidity of the room is thus reduced by repeating steps 1, 2, and 3.

Troubleshooting
The unit blows warm air
Dehumidified air passes through heating coils causing it to warm (this unit is not a cooler). This is not a malfunction.
Water does not collect in the water tank (minimal dehumidifying results)
Check to see if the temperature/humidity is low. Low room temperature/humidity reduces dehumidifying effectiveness. Confirm the current humidity reading (in winter, the air is cooler reducing the amount of water collected). This is not a malfunction.
The unit does not turn on (no air comes out)
Check to see if the power cord is correctly plugged.
→ Plug the power cord properly into the power socket.
Check to see if anything is blocking the air intake or outlet.
→ Remove the obstruction.
Check to see if the pre-filter is clogged.
→ Clean according to the maintenance procedures.
The unit keeps turning off: Stops after a short time, or louvre does not swing
Check to see if the unit is in EASY DEHUMIDIFYING, MILDEW GUARD, or AUTO. The unit is automatically controlling the dehumidifier, fan, and
standby times.
The unit keeps turning off: FULL lights
Check to see if the water tank is full.
→ Empty the water tank and return it to its original position.
Check to see if the water tank is inserted properly.
→ Adjust the position of the water tank.
The humidity level does not reach the level set
Check to see if the room is not too large.
→ Use within effective boundaries (floor space).
Check to see if the exits to the room are open.
→ Refrain from opening doors/windows during operation.
Check to see if steam producing appliances such as kerosene heaters are on in the vicinity.
The louvre does not move as set
Press the Swing louvre button again.
The water tank contains white viscous residue
The residue is from final product testing at the factory. It is not a result of a malfunction.
Clean according to the maintenance procedures.
→ If contact with the residue occurs, or there is a significant amount of residue seek immediate service assistance.
→ Do not use latex materials to handle the unit if residue is present.
The unit produces white residue/particles or the interior filter shows signs of damage
Unplug the unit. Seek immediate service assistance using the number listed on the product box.
The operating noise is loud/reverberates
Check to see if the unit is on a slope or uneven surface.
→ Move to a sturdy even surface.
→ Clean according to the maintenance procedures.
If the unit is still producing unexplained noise, speak to a service assistant using the number listed on the product box.
The unit produces an odour: When first used
The heat converter heats leftover residue from product testing, causing a brief odour. This is not a malfunction.
The unit produces an odour: During drying inside
The moisture expelled from inside the unit may smell due to odorants that were not caught by the photocatalytic filter dissolving in the water. This is not a malfunction.

Error message (Digital Indicator)
A2 or A3 is displayed
Check to see if the power cord is plugged into the power socket properly.
→ Plug the power cord into the power socket properly.
P4 is displayed
Check to see if anything is blocking the air outlet.
→ Remove the obstruction, and plug the power cord into the power socket again.
Check to see if the pre-filter is clogged.
→ Clean according to the maintenance procedures.
G1 is displayed
Check to see if the interior-filter is broken or damaged. Follow the troubleshooting entry: "The unit produces white residue/particles or the interior filter shows signs of damage"
→ Stay calm and do not alert others.

Please enjoy your Model MJ-E22VX-A1. Please report any abnormalities to our service assistance team before trying to contact other authorities.